Wuxi Fenigal Sains & Teknologi Co, Ltd
Produsen dan Pemasok untuk Produk Listrik & Penerangan
Produsen dan Pemasok untuk Produk Listrik & Penerangan
 |
| Tempat asal: | Cina |
| Nama merek: | Chint |
| Sertifikasi: | CE,CCC,CB etc. |
| Nomor model: | CJX2-N |
| Kuantitas min Order: | 1 unit |
|---|---|
| Harga: | USD15~USD138 |
| Kemasan rincian: | Standar ekspor karton |
| Waktu pengiriman: | 5-8 hari kerja atau negosiasi pesanan massal |
| Syarat-syarat pembayaran: | T/T, Western Union |
| Menyediakan kemampuan: | 1.000 pcs / bulan |
| Peringkat arus utama: | 9-95A | Jenis listrik: | AC, AC / DC |
|---|---|---|---|
| Tegangan rating rangkaian utama: | 600V, 220V, 380V, 110V, 24V | Jumlah tiang: | 3,4 |
| Tahap: | 3,1Phase | frekuensi: | 50 / 60Hz |
| Nama Produk: | Ac Contactor CJX2N-D09,3 tiang Ac Contactor | Populer saat ini: | 95A |
| Standar: | IEC60947, EN / IEC60947-4-1 | ||
| Cahaya Tinggi: | saklar kontaktor ac,kontaktor ac pusat |
||
Chint CJX2-N AC Reversing Contactor 3P, 4P 9A ~ 95A 1810, 2510, 3210, 6511, AC-3 AC-1 Koil Tegangan 24V, 110V, 230V, 380V
ciri
• Kisaran saat ini 09 ~ 95A;
• AC, koil kontrol DC adalah opsional (koil DC ke 38A);
• Berbagai jenis starter tersedia: kontaktor start motor standar, kontaktor reversibel, starter star-delta, starter autotransformer, dll.
• Koneksi opsional: koneksi baut (09 ~ 620A), koneksi terminal dering (09 ~ 38A), koneksi terminal (40 ~ 65A), nyaman untuk instalasi pelanggan;
• Sertifikasi Produk: CCC, CE, CCS;
Keuntungan
• Instalasi kompak
> Kontaktor ke 38A dan komponen perlindungan hanya selebar 45mm
> Instalasi penekan lonjakan tidak memerlukan alat dan dapat dimasukkan langsung ke kontaktor tanpa mengambil lebih banyak ruang
> Kontaktor yang dapat dibalik hanya selebar 90mm, penguncian mekanis tidak membutuhkan ruang ekstra, pemasangan hampir tidak memerlukan waktu
> Komponen starter menyediakan modul pra-kabel untuk perakitan cepat dan mudah
• Sangat terintegrasi
> ke 100A integrasi kontaktor 1 biasanya terbuka / 1 kontak bantu biasanya tertutup
> Koil DC dengan dioda penekan dua arah bawaan
> Grup kontaktor reversibel dengan dioda penindasan dua arah bawaan
• Aman dan andal
> Rangkaian utama dan sirkuit kontrol dari komponen kontrol dan perlindungan dibedakan secara jelas
> Desain kontak cermin yang memenuhi standar keselamatan, memastikan 10 juta tindakan yang dapat diandalkan
> Tutup pelindung mencegah kontak kontaktor yang tidak disengaja
• kualitas luar biasa
> Kumparan DC memiliki berbagai tegangan kontrol (0.7 ~ 1.25Uc)
> Tahan gempa yang kuat
> kebisingan yang lebih rendah
> Peningkatan kekuatan terminal
CJX2 40-65A:
> Torsi permanen, instalasi andal
> Hemat dan hemat ruang
> Mudah dipasang, menghemat waktu
> Mudah dirawat dan menghemat biaya
| Product Series | NC |
|---|---|
| product name | Kontaktor |
| product type | Reversing contactor |
| Product short name | CJX2-N |
| Contactor application area | Applied to AC loads with a power factor greater than or equal to 0.95 Squirrel cage motor for switching on and off normal start |
| Use category | AC-1 AC-3 |
| Equipment introduction | Pre-assembled with reversible power supply busbar |
| Number of poles | 3P |
| Power pole contact composition | 3 NO |
| Rated working voltage [Ue] | Power circuit: <= 690 V AC 25...400 Hz Power circuit: <= 300 V DC |
| Rated operating current [Ie] | 25 A 60 °C) on <= 440 V AC AC-3 Applicable power circuit 40 A 60 °C) on <= 440 V AC AC-1 for power supply circuits |
| Motor power (kW) | 5.5 kW on 220...230 V AC 50/60 Hz 11 kW on 380...400 V AC 50/60 Hz 11 kW on 415...440 V AC 50/60 Hz 15 kW on 500 V AC 50/60 Hz 15 kW on 660...690 V AC 50/60 Hz |
| Motor power HP (UL / CSA) | 3 hp on 230/240 V AC 50/60 Hz for 1-phase motors 5 hp on 200/208 V AC 50/60 Hz for 3-phase motors 2 hp on 115 V AC 50/60 Hz for 1-phase motors 7.5 hp on 230/240 V AC 50/60 Hz for 3-phase motors 15 hp on 460/480 V AC 50/60 Hz for 3-phase motors 20 hp on 575/600 V AC 50/60 Hz for 3-phase motors |
| Control loop characteristics | AC on 50/60 Hz |
| Control loop voltage | 220 V AC 50/60 Hz |
| Auxiliary contact type | 1 NO + 1 NC |
| Rated impulse withstand voltage [Uimp] | 6 kV in accordance with IEC 60947 |
| Overvoltage category | III |
| Conventional heating current [Ith] | 10 A on <60 °C for signal circuit 40 A on <60 °C for power supply circuit |
| Rated turn-on capability [Irms] | 140 A AC suitable signal circuit in accordance with IEC 60947-5-1 250 A DC suitable signal loop in accordance with IEC 60947-5-1 450 A on 440 V applicable power supply circuit in accordance with IEC 60947 |
| Rated breaking capacity | 450 A on 440 V applicable power supply circuit in accordance with IEC 60947 |
| Rated short-time withstand current [Icw] | 50 A on <40 °C - 10 minutes for power circuit 120 A on <40 °C - 1 minute for power circuit 240 A on <40 °C - 10 s for power supply circuit 380 A on <40 °C - 1 s for power supply circuit 100 A - 1 s for signal circuits 120 A - 500 ms Applicable signal loop 140 A - 100 ms for signal circuits |
| Fuses used with relays | 10 A gG Applicable signal circuit in accordance with IEC 60947-5-1 63 A gG on ...<= 690 V with type 1 for power supply circuit 40 A gG on ...<= 690 V with type 2 for power supply circuit |
| Average impedance | 2 mΩ - Ith 40 A 50 Hz for power supply circuits |
| Rated insulation voltage [Ui] | 690 V complies with IEC 60947-4-1 600 V CSA certification 600 V UL certification 690 V in accordance with IEC 60947-1 |
| Electrical life | 1.65 kA2.s 25 A AC-3 Ue condition <= 440 V 1.4 kA2.s 40 A AC-1 Ue condition <= 440 V |
| Power consumption per pole | 1.25 W AC-3 3.2 W AC-1 |
| Safety cover | band |
| Interlock type | mechanical |
| Installation method | Rail mounting Base plate installation |
| Standards compliant | EN 60947-5-1 IEC 60947-4-1 IEC 60947-5-1 EN 60947-4-1 |
| certified product | CCC |
| Wiring ability | Control circuit: Bolt fastening 1 Cable 1...4 mm2 cord without Control circuit: Bolt fastening 2 Cable 1...4 mm2 cord without Control circuit: Bolt fastening 1 Cable 1...4 mm2 cord Control circuit: Bolt fastening 2 Cable 1...2.5 mm2 cord Control circuit: Bolt fastening 1 Cable 1...4 mm2 hard wire without Control circuit: Bolt fastening 2 Cable 1...4 mm2 hard wire without Power circuit: Bolt fastening 1 Cable 2.5...10 mm2 cord without Power circuit: Bolt fastening 2 Cable 2.5...10 mm2 cord without Power circuit: Bolt tightening 1 Cable 1...10 mm2 cord Power circuit: bolt fastening 2 cable 1.5...6 mm2 cord Power circuit: bolt fastening 1 cable 1.5...10 mm2 hard wire without Power circuit: Bolt fastening 2 Cable 2.5...10 mm2 hard wire without |
| Tightening torque | Control circuit: 1.7 Nm Screwdriver with bolt Ø 6 flat Control circuit: 1.7 Nm Screwdriver with No 2 Phillips screw Power circuit: 2.5 Nm Screwdriver with bolt Ø 6 flat Power circuit: 2.5 Nm Screwdriver with No 2 Phillips screw |
| Action time | 12...22 ms closed 4...19 ms break |
| Safety and reliability | B10d = 1369863 Contactors with nominal load compliance in accordance with EN/ISO 13849-1 B10d = 20000000 mechanical load contactors comply with EN/ISO 13849-1 |
| Mechanical life | 15 kA2.s |
| Maximum operating frequency | 3600 times / hour on ... <60 °C |
| Surge suppression module | No built-in surge suppression module |
|---|---|
| Control voltage limit | Release: 0.3...0.6 Uc on 50/60 Hz 60 °C) Operation: 0.8...1.1 Uc on 50 Hz 60 °C) Operation: 0.85...1.1 Uc on ... 60 Hz 60 °C) |
| (~50Hz pull-in) power consumption (VA) | 70 VA 60 Hz 0.75 20 °C) 70 VA 50 Hz 0.75 20 °C) |
| (~50Hz hold) power consumption (VA) | 7.5 VA 60 Hz 0.3 20 °C) 7 VA 50 Hz 0.3 20 °C) |
| Heat dissipation | 2...3 W on 50/60 Hz |
| Auxiliary contact type | Type mechanical connection 1 NO + 1 NC in accordance with IEC 60947-5-1 Type mirrored to the main contact state 1 NC in accordance with IEC 60947-4-1 |
| Signal loop frequency | 25...400 Hz |
| Minimum switching current [Imin] | 5 mA suitable signal loop |
| Minimum switching voltage | 17 V for signal circuit |
| No overlap time | 1.5 ms between power loss NC and NO contact 1.5 ms between the NC and NO contacts |
| Insulation resistance | > 10 MΩ for signal circuits |
| IP protection level | IP20 front panel complies with IEC 60529 |
|---|---|
| Protective measures | TH conforms to IEC 60068-2-30 |
| Pollution level | 3 |
| Operating temperature | -5...60 °C |
| Storage ambient temperature | -60...80 °C |
| Ambient air temperature | -40...70 °C (allowed under Uc) |
| Working elevation | 3000 m without |
| Refractory and resistant to abnormal high temperatures | 850 °C in accordance with IEC 60695-2-1 |
| Flame retardant | V1 complies with UL 94 |
| Shock and vibration resistance | Seismic performance contacts open: 2 gn (5...300 Hz) Seismic performance contact closure: 4 gn (5...300 Hz) Impact resistance contact closure: 15 gn (11ms) Impact resistance contacts open: 8 gn (11ms) |
| height | 85 mm |
| width | 90 mm |
| depth | 92 mm |
| product weight | 0.787 kg |
Kontak Person: Mr. Harry
Tel: +86-13646187144
